{JP1/Base}付録K.5　操作ログを出力するための設定

JP1
  • 物理ホスト

1.操作ログ定義ファイル（jp1bs_baselog_setup.conf）を編集する

vim /etc/opt/jp1base/conf/jp1bs_baselog_setup.conf

"ENABLE"=dword:00000000
↓
"ENABLE"=dword:00000001

2.jbssetcnfコマンドを実行する

/opt/jp1base/bin/jbssetcnf /etc/opt/jp1base/conf/jp1bs_baselog_setup.conf

3.JP1/Baseを再起動

/etc/opt/jp1cons/jco_stop
/opt/jp1base/bin/jbs_spmd_stop
/opt/jp1base/bin/jevstop
/opt/jp1base/bin/jevlogdstop

/opt/jp1base/bin/jbs_spmd
/opt/jp1base/bin/jevstart
/opt/jp1base/bin/jevlogdstart
/etc/opt/jp1cons/jco_start

/opt/jp1base/bin/jbs_spmd_status
/opt/jp1base/bin/jevstat
/opt/jp1base/bin/jevlogdstat
/opt/jp1cons/bin/jco_spmd_status

4.動作確認

ls -l /var/opt/jp1base/log/BASE

cat /var/opt/jp1base/log/BASE/base_log.log
tail -f /var/opt/jp1base/log/BASE/base_log.log


/opt/jp1base/bin/jbs_spmd_reload

 

  • 論理ホスト

1.共有ディスク上の操作ログ定義ファイル（jp1bs_baselog_setup.conf）を編集する

vim /mnt/sdc2/im/jp1base/conf/jp1bs_baselog_setup.conf

[mmm190\JP1BASE\BASE_LOG]
"ENABLE"=dword:00000001
"LOGFILEDIR"="/mnt/sdc2/im/jp1base/log/BASE"
"LOGSIZE"=dword:00100000
"LOGFILENUM"=dword:00000004
"LOGCHANGEOPT"=dword:00000000

2.実行系でjbssetcnfコマンドを実行する

/opt/jp1base/bin/jbssetcnf /mnt/sdc2/im/jp1base/conf/jp1bs_baselog_setup.conf


3.実行系の設定を待機系に反映

共通定義情報の出力
/opt/jp1base/bin/jbsgetcnf -h mmm190 > /root/jbscnf.txt
scp /root/jbscnf.txt mmm192:/root

共通定義情報の取り込み
ssh mmm192 "/opt/jp1base/bin/jbssetcnf /root/jbscnf.txt"

4.JP1/Baseを再起動

/etc/opt/jp1cons/jco_stop.cluster mmm190
/etc/opt/jp1base/jbs_stop.cluster mmm190

/etc/opt/jp1base/jbs_start.cluster mmm190
/etc/opt/jp1cons/jco_start.cluster mmm190

/opt/jp1base/bin/jbs_spmd_status -h mmm190
/opt/jp1base/bin/jevstat mmm190
/opt/jp1cons/bin/jco_spmd_status -h mmm190

 

5.動作確認

ls -l /mnt/sdc2/im/jp1base/log/BASE

cat /mnt/sdc2/im/jp1base/log/BASE/base_log.log
tail -f /mnt/sdc2/im/jp1base/log/BASE/base_log.log


/opt/jp1base/bin/jbs_spmd_reload -h mmm190